ТМ
1.4.7 Removable LCD board
The Removable LCD control board (see figure 8) is meant to set the brightness of the Machine's LCD.
The LCD's brightness might need to be regulated in the following situations:
• Changing the display with a new one
• Resetting of display's brightness settings (for example in case of transportation of the Machine)
• To regulate LCD brightness during operations.
The brightness should be set when the Machine is switched ON, carefully turning the brightness kerf in
the required direction, to achieve optimum brightness settings for the LCD.
ATTENTION! Brightness should be regulated only by the technician(s), who are well-
versed in the Machine's functioning.
1.4.8 Keyboard shortcuts
The machine is equipped with a 3-button keypad located in the control compartment machine (see fig-
ure 2 position 8), for quick access to the following
• operator's menu – access to operator's menu
• technician's menu – access to technician's menu / service engineer
• test – provides for product selection without payment
Version 3.4 / November 2016
FOODBOX / FOODBOX LONG
Fig.8 - LCD board, removable
OPERATOR
TECHNiCiAN
MENU
Regulatory kerf
TEST
Fig.9
Page 21