Snack; Service - Unicum FOODBOX LIFT TOUCH User Manual

ТМ
FOODBOX TOUCH, FOODBOX LONG TOUCH, FOODBOX LIFT TOUCH

9.2 Snack

9.2.1 Service

bUTToN
Selection Position
Lift Position
Use Lift
Set
Test Motor
Test All Motors
Lift To Top
(for foodbox Lift Touch only)
Lift To bottom
(for foodbox Lift Touch only)
Lift To Position
(for foodbox Lift Touch only)
open Lift
(for foodbox Lift Touch only)
Test Alarm
Version 1.3 / December 2018
figure 25 - Snack [Service]
The tested cell number entry.
For the machine FoodBox Lift Touch programmable position of the lift
relative to the upper sensor in millimetres ("0" is the top position and the more
number, the below will be the lift, the centimetre is specified by value 10).
This value is important for all cells for those who are issued
with a lift and cells that are issued without a lift. In the first case, the position
of lift should be opposite the shelf and the second-the above product (to the
falling product does not touch the lift).
If the lift is installed in the machine, this setting must be in the position Yes.
For machines without the lift - in position No.
Set-it is moving of lift in the installed option.
The motor turning in the specified cell.
Turning all motors (Test all motors).
Lift movement to the uppermost position.
Lift movement to the lowermost position, when it's still not opening.
Lift movement to the tested cell.
Lift movement to the home position (when the lift is downwards and fully
opened).
Turns on the siren for some time
DESCRIPTIoN
Page 37