Unicum FOODBOX User Manual page 71

ТМ
Fig.31 - Removal of vertical cover
2
3
4
1
Fig.33 - Removing the dispensing tray
• Remove the dispensing tray (see figure 31 ... 33) in the following manner:
- Unscrew the nuts as per figure 31 and remove the ventilation cover;
- According to figure 32 unscrew the upper and lower nuts which secure the tray.
- Carefully pull out the tray (see figure 33 position 1);
- Loosen the nuts (see figure 33, position 2), raise a bit and remove the cover (see figure 33 position 3)
- Disconnect the tray earthing wire from the Machine's body (see figure 33 position 4);
• Check the condensate container (see fig 33, position2). If it is full with water, empty it using available
means (sponge, fabric, syringe, wet vacuum cleaner);
• Clean the container using fabric;
• There should be no water in the trays (see fig 33, position 3) and on the electric wire casing. If there
is water you must dry it out using a dry cloth and let everything dry before turning ON the Machine.
After maintenance works and cleaning of the refrigeration unit carefully check the unit's integrity, then
carefully reinstall the dispensing tray and the cover in the dispensing compartment. Doing so make sure
that the earthing wire and refrigerator's tubes are not pressed against anything or damaged.
Version 3.4 / November 2016
FOODBOX / FOODBOX LONG
2
Fig.32 - Fixing the dispensing tray
Page 71