Servicing Mode; Menu Item [1.1 System] - Unicum FOODBOX User Manual

ТМ

2.4.4 Servicing mode

The Machine is to be serviced, when it is in the MAiNTENANCE mode. For optimum servicing the Machine
comes with two types of MAiNTENANCE MENUS.
• the technician's menu: Machine configuration, control of machine's equipment and monitoring the
products. To enter this mode press the 2 nd button from the left of the "Technician" on the quick access
keyboard. To find the control panel please see section 1.4.7. To find the quick access buttons see
figure 9.
• operator's menu: Controlling the equipment's operations, display of detailed information about the
Machine's working and monitoring funds.
To enter the "Operator's menu" press button №1 to the left of the Operator on the control panel. To find the
control panel please see section 1.4.7. The quick access buttons can be seen in figure 9.
After entering the required menu use the buttons on the keyboard (see the following figure) to navigate
through the menu and to edit the parameter values.
↑
←
↓
cancel
(image) Navigation buttons on the keyboard:
Version 3.4 / November 2016
FOODBOX / FOODBOX LONG
Button 2 – the UP key to shift one position up in the menu or to
select the previous parameter in the editing menu;
Button 8 – the DOWN key to shift one position down the menu or
to select the next parameter in the editing mode;
→ Button 6 – to enter the sub-menu / shift right of the edited param-
eter;
Button 4 – shift left of the edited parameter;
Button ENTER – to enter the editing mode / to confirm and exit
editing mode;
Button CANCEL – exiting the editing mode cancelling changes /
exiting current menu item / exiting the menu
enter
Page 34