Master/Slave Mode; Information Mode - Ledj PRO LED Starcloths CW Series User Manual

Operating instructions

Master/slave mode:

To set the unit as the master or slave press the "SET/ESC" button to show "SET MENU" on the LCD
display. Now press the "ENTER" button and use the "UP/DOWN" buttons to scroll to
"MASTER & ALONE". Press the "ENTER" button and use the "UP/DOWN" buttons to switch from
"MASTER" or "ALONE" (SLAVE). Press the "ENTER" button to save your setting.
Restore default mode:
In this mode you can restore your settings to its original default settings. To do this press the "SET/ESC"
button to show "SET MENU" on the LCD display. Now press the "ENTER" button and use the
"UP/DOWN" buttons to scroll to "RELOAD DEFAULT". Now press the "ENTER" button and use
the "UP/DOWN" buttons to select either "ON" or "OFF".
Press the "ENTER" button to save your setting.
Auto & sound mode:
In this mode you can have the built-in programmes running with either auto run or sound active.
To enter this mode press the "SET/ESC" button to show "SET MENU" on the LCD display.
Now press the "ENTER" button and use the "UP/DOWN" buttons to scroll to "AUTO & SOUND".
Now press the "ENTER" button and use the "UP/DOWN" buttons to select either "AUTO" or "SOUND".
Press the "ENTER" button to save your setting.
Clear display mode:
In this mode you can have the LCD display to slowly fade out slowly or to stay on constantly. To enter
this mode press the "SET/ESC" button to show "SET MENU" on the LCD display. Now press the "ENTER"
button and use the "UP/DOWN" buttons to scroll to "CLEAR DISPLAY" Now press the "ENTER" button
and use the "UP/DOWN" buttons to select either "DELAY OFF" or "ALWAYS ON".
Press the "ENTER" button to save your setting.
Key lock mode:
In this mode you can lock the LCD display so no unwanted users can change the settings. To enter this
mode press the "SET/ESC" button to show "SET MENU" on the LCD display. Now press the "ENTER"
button and use the "UP/DOWN" buttons to scroll to "KEY LOCK". Now press the "ENTER" button and use
the "UP/DOWN" buttons to select either "ON" or "OFF".
Press the "ENTER" button to save your setting.
Please note: To unlock the display you must press the following sequence:
1: SET/ESC, 2: DOWN, 3: UP, 4: ENTER

Information mode:

In this mode you see the information for web address, name of the product, telephone number,
date and time and the serial number. To enter this mode press the "SET/ESC" button to show
"INFORMATION" on the LCD display. Now press the "ENTER" button and use the "UP/DOWN"
buttons to scroll through each bit of information.
www.prolight.co.uk PRO LED Starcloths, CW User Manual
6