Danfoss VLT HVAC Drive FC 102 Programming Manual page 119

Parameter Descriptions
13-52 SL Controller Action
Array [20]
Option: Function:
[34] Set digital out C Any output with digital output 3 selected
low is low (off).
[35] Set digital out Any output with digital output 4 selected
D low is low (off).
[36] Set digital out E Any output with digital output 5 selected
low is low (off).
[37] Set digital out F Any output with digital output 6 selected
low is low (off).
[38] Set digital out Any output with digital output 1 selected
A high is high (closed).
[39] Set digital out B Any output with digital output 2 selected
high is high (closed).
[40] Set digital out C Any output with digital output 3 selected
high is high (closed).
[41] Set digital out Any output with digital output 4 selected
D high is high (closed).
[42] Set digital out E Any output with digital output 5 selected
high is high (closed).
[43] Set digital out F Any output with digital output 6 selected
high is high (closed).
[60] Reset Counter A Resets counter A to zero.
[61] Reset Counter B Resets counter B to zero.
[62] Counter A (up)
[63] Counter A
(down)
[64] Counter B (up)
[65] Counter B
(down)
[70] Start Timer 3 Starts timer 3, see parameter 13-20 SL
Controller Timer for further description.
[71] Start Timer 4 Starts timer 4, see parameter 13-20 SL
Controller Timer for further description.
[72] Start Timer 5 Starts timer 5, see parameter 13-20 SL
Controller Timer for further description.
[73] Start Timer 6 Starts timer 6, see parameter 13-20 SL
Controller Timer for further description.
[74] Start Timer 7 Starts timer 7, see parameter 13-20 SL
Controller Timer for further description.
[80] Sleep Mode Starts the sleep mode.
[90] Set ECB Bypass
Mode
[91] Set ECB Drive
Mode
[100] Reset Alarms
MG11CE02
Programming Guide
Danfoss A/S © 03/2015 All rights reserved.
3 3
117