Bluetooth; Wi-Fi Settings; Connect To Wi-Fi Network - Grandstream Networks GSC35 Series User Manual

802.1x Identity
802.1x Secret
CA Certificate
Client Certificate
Private Key

Bluetooth

Bluetooth Settings
Visible to Nearby
Bluetooth Devices
Device Name
Paired devices

Wi-Fi Settings

Connect to Wi-Fi Network

Users can connect wirelessly to a network using Wi-Fi under GSC3510/GSC3505 Web GUI → Network
Settings → Wi-Fi Settings. In order to connect to a network using Wi-Fi, please, refer to the following
steps:
1. Go to GSC3510/GSC3505 Web GUI → Network Settings → Wi-Fi Settings → Wi-Fi Basics.
2. Enable Wi-Fi Function by turning the option on.
3. Click on Scan to show the list of Wi-Fi networks available around the GSC3510/GSC3505
Note: The list of Wi-Fi Networks refreshes automatically every 15 seconds and user can force to refresh
by clicking again on "Scan".
Enters the identity information for the selected 802.1x mode. (This setting
will be displayed only if 802.1 X mode is enabled).
Enters the secret for the 802.1x mode. This option will appear when 802.1x
mode is EAP-MD5 or EAP-PEAP.
Uploads the CA Certificate file to the device. (This setting will be displayed
only if the 802.1 X mode is enabled)
Loads the Client Certificate file to the device. (This setting will be displayed
only if the 802.1 X TLS mode is enabled)
Loads the private key file to the device. (This setting will be displayed only
if the 802.1 X TLS mode is enabled)
Enable or Disable Bluetooth on GSC3510/GSC3505
Enable the GSC3510/GSC3505 to be visible via Bluetooth by nearby
devices for a duration of 2 minutes.
Configures the name that will be shown to other Bluetooth devices.
Lists paired devices.
Press to unpair/remove the device from the list.
GSC35XX Series User Manual
Version 1.0.0.15
P a g e | 67