Multicast Paging - Grandstream Networks GSC35 Series User Manual

Call Progress Tones:
• Dial Tone
• Second Dial Tone
• Ring Back Tone
• Busy Tone
• Reorder Tone
• Confirmation Tone
• Call-Waiting Tone
Call-Waiting Tone Gain
Default Ring Cadence

Multicast Paging

Multicast Paging
Paging Barge
Paging Priority Active
Multicast Paging Codec
Multicast Listening
•
Priority
•
Listening Address
•
Label
Configures tone frequencies according to user preference. By default, the
tones are set to North American frequencies. Frequencies should be
configured with known values to avoid uncomfortable high pitch sounds.
•
Syntax: f1=val,f2=val [,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing ("On time" in "ms") while OFF is the period of
silence. In order to set a continuous ring, OFF should be zero. Otherwise
it will ring ON ms and a pause of OFF ms and then repeats the pattern.
Please refer to the document below to determine your local call progress
tones: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
Adjusts the call waiting tone volume. Users can select "Low", "Medium" or
"High". The default setting is "Low".
Defines the ring cadence for the device. The default setting is:
c=2000/4000.
Sets the threshold of paging calls. If the paging call's priority is higher than
the threshold, the existing call will be hold and the paging call will be
answered. Otherwise, the existing call does not be affected. If it is set to
Disable, any paging call will not be answered. The default setting is
"Disable".
Determines if a new paging call whose priority is higher than the existing
paging call will be answered. If it is checked, this feature will be enabled.
The default setting is disabled.
Selects the codec type for the multicast paging call. This list includes
PCMU, PCMA, G726-32, G722, and G729A/B, iLBC, Opus.
Configures the IP address and port number for monitoring multicast paging
call. Reboot the device to make changes take effect.
The valid IP address range is from 224.0.0.0 to 239.255.255.255. Users
may also fill the label for each listening address corresponding to priority.
GSC35XX Series User Manual
Version 1.0.0.15
P a g e | 64