User Buttons Sw1, Sw2, Sw3, Sw4, Sw5 (Jp: 11, 12, 13, 14, 15) - Fujitsu MB91460 SERIES User Manual

3.7 User Buttons SW1, SW2, SW3, SW4, SW5 (JP: 11, 12, 13, 14, 15)

JP11, 12, 13, 14, 15 Five user push buttons (SW1-SW5) can be connected to the
Jumper Setting
JP11 (SW1)
JP12 (SW2)
JP13 (SW3)
JP14 (SW4)
JP15 (SW5)
Default: JP11, 12, 13, 14, 15 closed
By default, all push-buttons are connected to the microcontroller.
© Fujitsu Microelectronics Europe GmbH
SK-91467R-176PMC User Guide
Chapter 3 Jumpers and Switches
microcontroller.
Description
Closed Pin 119 (INT0) of the MCU is connected to "SW1"
Open No connection to the microcontroller
Closed Pin 120 (INT1) of the MCU is connected to "SW2"
Open No connection to the microcontroller
Closed Pin 168 (ICU0/TIN0) of the MCU is connected to "SW3"
Open No connection to the microcontroller
Closed Pin 92 (ATGX) of the MCU is connected to "SW4"
Open No connection to the microcontroller
Closed Pin 28 (NMIX) of the MCU is connected to "SW5"
Open No connection to the microcontroller
Table 3-14: User Push Buttons
- 27 - FMEMCU-UG-910053-16