Related Manuals for Fujitsu MB89PV930
Summary of Contents for Fujitsu MB89PV930
- Page 1 MB89PV930 EVALUATION BOARD Documentation Fujitsu Microelectronics America Inc San Jose CA Revision: V1.0 Date: 01/18/01...
- Page 2 San Jose ´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics America Inc San Jose in original packing and without further defects resulting from the customer’s use or the transport.
-
Page 3: Table Of Contents
Contents 1. Introduction 2. Hardware Documentation Board Features Hardware Requirement Jumper Setting Hardware Set-up 3 Software Documentation 3.1 Software Requirement 3.2 Software installation 3.3 Running the Sample Programs Appendix Schematic and drawings... -
Page 4: Introduction
1. Introduction The MB89PV930A Evaluation board is a low cast Evaluation board for the Fujitsu MB89930A series. It can be used as a low cost target system for software development. This board can be used with the In Circuit Emulator or can be used as a stand-alone application board. -
Page 5: Hardware Set-Up
Fujitsu Micro’s MCU CD-ROM V3.0 or higher PC with Windows 3.1x or higher. Sample application programs for MB89930A series. Software Installation Insert the Fujitsu CD-ROM into the CD-ROM drive and install the Softune Workbench for 8-bit Microcontroller. Install the sample program for MB89930A series. -
Page 6: Running The Sample Programs
Switch on the power supply for the evaluation board. Start the Softune Workbench (Fujitsu Integrated development environment) for 8- bit Microcontroller. If you are using the Fujitsu compact-ICE the Softune Workbench should be started with the –T2 option. To confirm this check the property of the Softune Workbench. -
Page 7: Appendix
Appendix Schematic:...