Table of Contents
Advertisement
1. Safety Regulation
It is designed and approved suitable for the requirements of Safety Category 3 in EN 954-1. This
1
functionality is called Safe Stop. Prior to integration and use of Safe Stop in an installation, a
thorough risk analysis on the installation must be carried out in order to determine whether the
Safe Stop functionality and safety category are appropriate and sufficient. In order to install and
use the Safe Stop function in accordance with the requirements of Safety Category 3 in EN 954-1,
the related information and instructions of the FC 300 Design Guide MG.33.BX.YY must be fol-
lowed! The information and instructions of the Operating Instructions are not sufficient for a
correct and safe use of the Safe Stop functionality!
6
MG.33.R1.02 - VLT
®
is a registered Danfoss trademark
MCO351 Positioning Controller
Advertisement
Table of Contents
