Table of Contents
Advertisement
MCO351 Positioning Controller
1. Safety Regulation
1.1.1. Approvals
1.1.2. Symbols
Symbols used in these Operating Instructions.
1.1.3. Disposal Instruction
NB!
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.
∗
Indicates default setting
Equipment containing electrical components may not be disposed of
together with domestic waste.
It must be separately collected with electrical and electronic waste
according to local and currently valid legislation.
The FC 300 AutomationDrive DC link capacitors remain charged after power has
been disconnected. To avoid electrical shock hazard, disconnect the FC 300 from
the mains before carrying out maintenance. When using a PM-motor, make sure it
is disconnected. Before doing service on the frequency converter wait at least the
amount of time indicated below:
MG.33.R1.02 - VLT
®
is a registered Danfoss trademark
1. Safety Regulation
3
1
Advertisement
Table of Contents
