Setup Maintenance Mode (M4); Outline; Extended Menu Display Selection Menu (M40) - Sony DNW-A220 Maintenance Manual

3-5. Setup Maintenance Mode (M4)

3-5-1. Outline

The setup maintenance mode is used for the setup menu.
This unit has two menus below.
SETUP MAITENANCE MODE
*
M40 : EXTENDED MENU
M49 : RESET ALL SETUP
Method to select M49: RESET ALL SETUP
(1) Turn the JOG dial while pressing the PLAY button and move the "*" mark.
(2) Press the SET button.

3-5-2. EXTENDED MENU Display Selection Menu (M40)

It is selected by switching the DIP switch S201-1 on the SY-259/259A board
whether display the extended menus of the setup menu or not.
However, only when this switch is OFF (factory setting), the extended menus are
enabled to display by this menu.
n
When the setting of the DIP switch S201-1 is ON, the extended menus are enabled
to display regardless of the setting in this menu.
To execute
(1) Turn the JOG dial while pressing the serch button, and the desired setting is
then displayed.
disable: Not display the extended menu
enable: Display the extended menu
(2) Press the SET button.
DNW-A220
DNW-A220P
3-5. Setup Maintenance Mode (M4)
3-5-2. EXTENDED MENU Display Selection Menu (M40)
Example of display
and operation
SETUP MAITENANCE MODE
M40 : EXTENDED MENU
disable
0 [Search] + DIAL (2)
(1)
SETUP MAITENANCE MODE
M40 : EXTENDED MENU
enable
Push SET Button
0 [SET]
(2)
3-5-1. Outline
3-61