Flow Comp; Meter Config; User List Keys; Alarms - Emerson Fisher FLOBOSS 407 Instruction Manual

FloBoss 407 Instruction Manual

5.4.4 Flow Comp

Press the
FLOW COMP
run. The ↑ and ↓ keys scroll through the parameters for the first meter run. To move to
the second meter run, press
parameters for the second meter run.

5.4.5 Meter Config

Press the
METER CONFIG
The LCD displays the pipe diameter, orifice diameter, latitude, elevation, calculation
method, tap type, orifice material, DP low flow cutoff for the meter run.

5.4.6 User List Keys

There are three
USER LIST
keys display lists of parameters configured using the ROCLINK Configuration
LIST
Software. Figure 5-5 shows the format of the User List display.

5.4.7 Alarms

The key causes the FloBoss 407 to scroll through the alarm log. The display
ALARMS
shows the date of the logged alarm as month, day (1, 12) and the time as hour: minute
(12:06).
The SET/CLR field indicates whether the alarm is set or cleared. The TYPE field
displays a 4-character alarm type description such as (LOLO, HIHI). The TAG and
VALUE fields identify the tag of the point alarmed and the value at the time of alarm.
Figure 5-6 shows the alarm summary display.
Rev 5/00
key to display the gas composition parameters for the first meter
and
ALT NEXT SET
key to display information concerning the selected meter run.
keys: ,
USER LIST1
L L L L I I I I S S S S T T T T # # # # 1 1 1 1
D D D D E E E E S S S S C C C C R R R R I I I I P P P P T T T T I I I I O O O O N N N N

Figure 5-5. User List Display

. The LCD starts displaying the
, and
USER LIST2 USER LIST3
1 1 1 1 O O O O F F F F
V V V V A A A A L L L L U U U U E E E E
. The
USER
1 1 1 1 0 0 0 0
5-11