Emerson Fisher FLOBOSS 407 Instruction Manual page 173

FloBoss 407 Instruction Manual
Select Meter Run
TAG 1
TAG ...........
Exit
*********************************
DP Reading
Zero Shift Effect
Verify
Calibrate
Exit
Calibration Step 5
Adjust Zero Shift
Zero Shift
Save
Exit
Adjust Zero Shift Display
DP Reading
Verify
Calibrate
Exit
Zero Shift Effect
Calibration Step 5
Verify Calibration
App. Value
Cur. Value
Accuracy
Log Verif.
Exit
Verify Calibration Display
Rev 5/00
DATA
DATA
DATA
DATA
Selecting from
EXIT SELECT METER RUN
display returns the date and time display and
exits the calibration program.
**************************************
The second option available from Calibration
Step 5 is
ZERO SHIFT EFFECT
appears when
DP READING
Press the key on the
EDIT
Apply working pressure, let stabilize, then save.
Selecting discards the data
EXIT
program to Calibration Step 5. The
option saves the zero shift data, logs the event,
and returns the program to Calibration Step 5.
To verify the calibration, select the
option at Calibration Step 5. The program
advances to the
VERIFY CALIBRATION
The program scrolls through the list of Applied
Value, Current Value, and Accuracy (computed
as a difference). Apply a test signal and press
the key on the
ENTER APP. VALUE
the corresponding test value. Verify as many
test values as desired. Select
the last verified value to the event log.
returns the program to Calibration Step 5.
. This option only
is selected.
line.
ZERO SHIFT
returns the
and
SAVE
VERIFY
display.
line to enter
to log
LOG VERIF.
EXIT
B-17