Security; Logging Off The Lcd; Continually Displaying The Last Parameter - Emerson Fisher FLOBOSS 407 Instruction Manual

FloBoss 407 Instruction Manual

5.5 SECURITY

Security features are implemented through the ROCLINK Configuration Software by the system
manager. Each user is assigned a 4-digit password. The system manager assigns the User Lists that the
user is allowed to access. Refer to Section 8.3 of the ROCLINK manual).

5.5.1 Logging Off the LCD

The LCD continues to display the last selected list or value until it is turned off. To
turn the display off and log off, press the
keypad operations, press any key and enter your Password.
Another way to secure the display is to press the
This logs the current user out of the system. To reactivate keypad operations, you must
log on with a correct password.

5.5.2 Continually Displaying the Last Parameter

After logging out using
key to cause the LCD to show the last parameter displayed.
For example, if at a particular FloBoss 407 installation you wanted to continually
monitor a Min/Max reading:
1. Press any key.
2. Enter your Password.
3. Press the
ALT
4. Select the desired history point to display its values.
5. Log off with the
6. Press the
ALT
The previously selected values continually displays until someone logs on.
Rev 5/00
ALT
and , you can press the
ALT PASSWORD
key and then the
MIN/MAX
and
ALT PASSWORD
key and then the
CANCEL
and key. To restart the
DISPLAY OFF
key and then the
ALT
key and the
ALT
key.
key sequence.
key.
key.
PASSWORD
CANCEL
5-17