Editing Of Record; Project Button - Adash VA4 Pro II User Manual

ADASH
The process is finished when
- the time is over,
- manually by Stop button,
- the memory is full.

Editing of Record

Run the Recorder. The list of records which are saved already in the memory appears on the screen. The time
and date of last saving of selected record is displayed in top right corner. Select one of them (arrows and OK).
The preview of recorded signals appears.

Project button

New the new project for recording
Copy copies all record parameters to new project without the recorded data
Rename renames the project
Delete deletes project from memory
Clear Data deletes recorded data, all record parameters is kept
Notes adds the notice to the record, see Global Properties/ User Notes chapter
Export exports the record to VA4_DISC
Note! The max size of exported record is 4 GB. The total size of flash drive is 8GB. The 4 GB
represents 80 minutes of 4 channel recording with 65kHz sampling frequency. One second
takes 800kB. When you want to export bigger record, then the error Not enough space
appears. Large record you need to split to several smaller records. Use the Recorder module,
open the record and by using of Cursor and Length buttons select part of record. Press Save
selection as and define new name. Do not forget to delete record from VA4_DISC after
For further technical and contact information visit
108
www.adash.com or email: info@adash.com
Adash 4400 – VA4Pro