Honeywell X Series User Manual page 99

Batch mode is for each group BATMD1 to BATMD6. Used in embedded variables as
[[BATMD1.v]], will also allow the current batch name to be embedded using [[BATMD.t]].
Other information can be accessed by exchanging the Pn with the following variables, see
Figure 4.5.
In
varaible.
An example for pen information, in Mark on Chart enter: [[name.v]] [[P1.T]] [[P1.V]]
[[P1.U]].
This will display the marker as: Furnace1 Temperature is 14.81 Deg C.
43-TV-25-30 Iss.6 GLO Aug 07 UK
Maths variables as embedded variables
Syntax
An
BATMDn
BLKVn
CFFREE
CJCn
CJCnC
CVn
Dn
DIOn
EC1
FTPHRS
Figure 4.10 is an example that shows pen information can be used as an emebedded
Figure 4.10 Embedded variables for pen information
Table 4.5 : more embeded variables
Syntax
GLBVn
HPC1
INTHRS
IOC1
LPC1
Pn
PnAnL
PnMINU
PnMAXU
PSTVn
PRC
Syntax
HPULn
LPULn
RAn
RTCOMPn
RTCALn
Tn
UC1
USB1FREE
USB1FREE
UV1
93