Software Installation; Upgrades - Honeywell X Series User Manual

Software Installation

The Comms server is only available with the TrendServer software. The comms server will
auto install with the TrendServer software.
Ensure the same communications information is entered into the hardware and the software
in order for the communications link to work.e.g. Device name and ID., IP address of the
device etc.
Install TrendServer from the TrendManager Pro Suite folder and the comms server
and database servers install automatically.
Before installing the software on to your PC, it is recommended to close down all other ap-
plications, including any programs that automatically load during the start up procedure.
It is not recommended to load multiple installations on the same PC.
Load the CD into the drive and wait for the autorun sequence to start. If autorun does not
commence, follow these instructions:
Follow the instructions on the screen
During installation you will be asked to select or confirm the following:
A destination folder and file path will be designated, but this can be changed if required by
using the browse button.
This will be dependant on which version has been purchased. TrendViewer, TrendManag-
er Pro, or TrendServer Pro.
Enter the code and organisation as supplied with each particular version of software. The code can be
found inside the CD case. No code or organisation is required with
NB: This is an alpha/numeric code and must be entered exactly in upper case. Codes from
other Honeywell software will not work, each code is unique to the software supplied.
The TrendManager Suite may find it necessary to automatically upgrade certain applica-
tions within your PC to complete installation.
The setup will require a re-boot (re-start your computer) to complete installation

Upgrades

There are three software packages available: TrendViewer
and TrendServer. If your software upgrade is for the same package the software will au-
tomatically over-write the previous version. Local database information will not be affected
and all devices data and setups are retained. Any other remote database servers will have
to be added manually.
If you have purchased a different package to what is already installed, the new software will
detect this and only make available the same package. To install a different package, first
un-install the previous version. There is no need to save databases or data, these will not
be lost when un-installing the previous version. Devices and data held on a local database
are retained for use with the new package as long as it is installed into the same directory.
212
• go to 'My Computer'
• select CD ROM drive
• select Launch.exe
• Which language variant (where applicable)
• Destination folder for the software:
Select which version of the application software to install.
Select to install
TrendViewer.
,
TrendManager Pro Suite
43-TV-25-30 Iss.6 GLO Aug 07 UK