User Interface Control; Power Up; Menu Access; Section 4: Recorder Setup - Honeywell X Series User Manual

Section 4: Recorder Setup

Configuration of the recorder is performed in the Menu screens and the data is displayed in
the Process screens. This section takes you through the Menu system and how to set up
your recorder.
setting up screens to display the data.

User Interface Control

All user actions can be performed via the touch screen using the stylus. All on-screen selec-
tion and navigation areas are large enough so the unit can be operated without falsely se-
lecting an adjacent option using the stylus provided.
The stylus is to be used to operate the touch screen. It has a rounded end to avoid damage
to the screen. Only a light touch is required to activate the screen. Two styluses are provided
and there is a special slot at the top of the recorder to slide the stylus in from the right. If the
touch screen does not match correctly to where you are touching it with the stylus the screen
may need calibrating.
Other User Interface Control
All user actions can be performed using a mouse or keyboard attached to a USB host port.

Power up

1. Menu Access

When the recorder is powered up the display will show a splash screen followed by an ini-
tialisation screen displaying the default language flag.
The first screen to appear on the recorder is a default process screen with the menu bar at
the top. Select the Menu button to access the menu system to configure the recorder. The
Menu button takes you to the Main Menu.
From the Main Menu you may be required to Log In, if the Password function is active, see
"2. Log On/Off" on page 46.
to the correct local settings, see
Access to
Main Menu
43-TV-25-30 Iss.6 GLO Aug 07 UK
See "Section 6: Screen Configuration" on page 187
See "Calibrate" on page 141.
If not, the next configuration required is to set the recorder
"3. Local Settings" on page
Figure 4.1 Default process screen
for information on
47.
45