Honeywell X Series User Manual page 220

Press the "Add" button to add a new recorder to the list.
Enter the IP address from the recorder that you noted earlier. If you don't know it select the
"Look up IP Address" button. The other method is to select the "Find Device" button. This
will search for all X Series recorders on the network using their Network ID, eg xs-nnnnnn
(where "nnnnnn" is the recorder's serial number).
Give a name for the recorder. This should be something recognisable, all recorders should
be given different names. Press OK.
On pressing "OK", then "Done" you will return to the External Import dialog box as above.
Check that "Setup only" and "from Network" are still selected. Then drop down the list and
select the recorder you have just added. The recorder name and IP address are in the list.
Finally select "Import", TrendServer Pro will download the setup from the recorder and
this will be displayed in a setup window. Press OK and this recorder setup will be added to
the recorder list.
Note: The recorder will be added to the list under the Recorder Name as set in the re-
corder itself. (This is the name that appears in the top right corner of the recorder
screen when in normal logging mode) NOT the name you gave the recorder when set-
ting up the FTP.
214
Or for Ethernet connections the setup can be
down-loaded from the recorder via FTP.
Select "Setup only" as shown, but change
"from directory" to "From Network (FTP)".
When "From network" is selected the dialog
box will change.
Hit the "Set up" button. The dialog box that
comes up will allow you set up your recorder
to allow FTP transfers.
Recorder information imported by FTP will
not update in the Modbus Profile tool. To en-
sure the recorder details are updated in the
Modbus Profile tool setup must be imported
manually using removable media.
See for more details "Modbus profile tool,
data update" on page 222.
43-TV-25-30 Iss.6 GLO Aug 07 UK