Screen Activity; Alarm Markers; Deviation Alarm Markers; Rate Of Change Alarm Markers - Honeywell X Series User Manual

Screen Activity

Alarm Markers

Deviation Alarm Markers

See "Alarms Menu" on page 68
Pen.

Rate of Change Alarm Markers

triggered. The Rate Up Alarm Marker will slope up to the right and the Rate Down Alarm
Marker will slope down to the right.
For Hi, Low and Deviation alarms.
Pen Pointers
Pen Pointers appear on a scale next to a chart when no bars are present. They move to dis-
play the real-time value. Each pen pointer is numbered according to its associated pen and
will flash yellow when that pen goes into an alarm state. Pen pointers will change direction
and point up or down when a pen signal goes off scale.
196
Alarm markers appear when an alarm is setup in the Pen Alarms menu. Hi
and Low alarm markers appear as a triangle on a DPM or Bar, pointing up
for a Hi alarm and down for a Low alarm.
page 68
These are diamond shape markers. Deviation is how far this pen can de-
viate from the Ref Pen before triggering an alarm.
There are two types of rate of Change Alarms; Rate Up and Rate Down.
They will appear on a DPM or Bar when a Rate Up or Rate Down type
alarm has been set up in the
Alarm Marker Flash Colours
Magenta flash
Yellow flash
Cyan (blue) flash
Grey
to set up the alarm Type, Deviation Level and the Ref
"Alarms Menu" on page 68
Table 6.1 :
Alarm Markers Flash Colour
In alarm not acknowledged
In alarm acknowledged, latched alarm
Out of alarm (latched) not acknowledged
Out of Alarm
See "Alarms Menu" on
and has been
43-TV-25-30 Iss.6 GLO Aug 07 UK