Honeywell X Series User Manual page 125

Style - Select Batch for running reports on current batches. Select Normal to run reports on
specific pens, all pens or groups.
Selection Type - This will be set to Group if Batch is selected for the Style, select which
group of pens the report will be run on. If the Style is set to Normal the following options will
be available:
Group - (only available when Pen Group is selected for Selection Type). Select the Pen
Group you wish to run a report on from the available groups list. To have groups of pens
available in this list, individual pens must be allocated to a group, see Group in the
Menu" on page
Current Pen Value - Select whether to include the Current Pen Values, of enabled pens, in
your report.
Max/Mins - Select this to include the Maximum and Minimum values of each selected pen,
All pens or Group of pens depending what has been chosen in the Selection Type option.
The report can give you the pen Max/Min value for every Hour, Day, Week, Month, the Cur-
rent max/min pen value or Do Not Include Max/Min values.
Averages - Select this to include the Average values of each selected pen, All pens or group
of pens depending what has been chosen in the Selection Type option. The report can give
you the pen Average value for every Hour, Day, Week, Month, the Current average pen val-
ue or Do Not Include Average values.
Pens - Pens - (only available when either Curent Pen Value or Max/Mins is set to Included).
Select which pens this report will be run on.
Totals - Select this to include the Total values of each selected pen, All pens or group of
pens depending what has been chosen in the Selection Type option. The report can give
you the pen Total value for every Hour, Day, Week, Month, the Current total pen value or
Do Not Include Total values.
Totaliser Pens - (only available when Multiple Pens is selected for Selection Type). This
will display any pens that have been set up as a totaliser pen.
page 72.
Messages - Select this to include the Messages of each selected pen, All pens or group of
pens depending what has been chosen in the Selection Type option. The report can give
you the pen Messages for the Last Hour, Last Day, Last Week, Last Month, All messages
or Do Not Include Messages.
Message Lists - Select which type of messages are required for your report: Alarm, Sys-
tem, Diagnostic, Security or User messages. One or more selections can be made. For
more information see
Counters - Select which type of Counters are required for your report: Alarm, User, Event,
Digital, Digital Input, Relay Output or Pulse. One or more selections can be made. For more
information see
Include Digital Inputs - Select to Include or Do Not Include this option.
Include Digital Outputs - Select to Include or Do Not Include this option.
Email - Tick to enable the Email function. See
page 154.
43-TV-25-30 Iss.6 GLO Aug 07 UK
• Multiple Pens - This allows you to select which pens to run a report on including Total-
iser pens
• Pen Group - Allows you to select which group of pens to run a report on
• All Pens - This will run a report on all the currently enabled pens
64.
"Message Types" on page 148.
"Events/Counters" on page 84.
See "Displaying Totals" on
Figure 4.7, "Email Report example," on
"Pens
119