Administrator; Policy - Honeywell X Series User Manual

This is the top level access to all menus. Only the Administrator has access to the password
setup. The Administrator is responsible for adding users and assigning their levels of access
throughout the recorder menu system. More than one Administrator can be set up.
User Administration
(Main Menu > Configure > Passwords > User Admin)
The Administrator can set up the recorder's password policies, permission levels of access
in the menu system and can add, delete and unlock users and assign their permission lev-
els. Passwords can be Reset from this screen.
The recorder will display a default setup that can be customised to suit. This is set out in
"Level Permissions" on page 173.
(Main Menu > Configure > Passwords > User Admin > Policy)
At the top of the Policy menu are four levels to be assigned, these are the permission levels
that will allow access to specific areas of the recorder menu system. The names of these
levels can be edited here.
128

Administrator

Policy

• Pwds Enable = Tick to enable the password menu
• Level 0 Name = Administrator. Highest permission level
• Level 1 Name = Engineer. Second highest permission level
• Level 2 Name = Supervisor. Third highest permission level
• Level 3 Name = Technician. Fourth highest permission level
• Level 4 Name = Operator. Fifth highest permission level
• Unrestrict - allows the Administrator to de-restrict access to certain areas so menus will
be available even without logging in.
• Menu Timeout Enable - Tick to activate the timeout facility to be enabled on the
menus. (This is always enabled for ESS).
• Menu Timeout - Set a specific time period of inactivity in a password protected area
before logging out. (20 to 3600 seconds)
• Web Timeout Enable - Tick to activate the timeout facility to be enabled on the web
page. (This is always enabled for ESS).
• Web Timeout - Set a specific time period of inactivity in the web page before logging
out. Enter the time in seconds. (20 to 3600 seconds)
• Old Passwords - Select how many previously used passwords are locked from use as
a new password. (Max.12 previous passwords, 0 for disabled) Cannot be disabled for
ESS recorders.
• Username Max - Set the maximum amount of characters that can be used for the User
name login. (1 to 20 characters, 4 to 20 for ESS recorders)
• Password Max - Set the maximum amount of characters that can be used for the Pass-
word login. (1 to 20 characters, 6 to 20 for ESS recorders)
43-TV-25-30 Iss.6 GLO Aug 07 UK