Internet Security Settings; Ip Address Troubleshooting; Firewall Settings - Honeywell X Series User Manual

If your recorder's IP address begins 169.***.***.*** this means there is no DHCP Server (
namic Host Configuration Protocol)
DHCP server available or allocate a Static IP address, see
The recorders IP address can be viewed in the Status menu, see

Internet Security Settings

Types of web browser for use with the Remote Viewer include Internet Explorer 5 and
above.
Figure 8.10, "Internet Security," on page 235
6 on a Windows
to be accessed in an intranet scenario then the same has to be done for local intranet option.
If this device is sitting on an enterprise network with a firewall in place then the firewall
should be configured to allow all requests on port 80 and port 976 (for remote control Ac-
tiveX). There is also one port for FTP control and one for OPC, which should be opened.
234

IP Address Troubleshooting

™
XP machine. The settings shown are for Internet access. If the device is

Firewall settings

available to create a dynamic IP address. Either, make a
shows an example from Internet Explorer
"TCP/IP" on page 73.
"General" on page 156.
43-TV-25-30 Iss.6 GLO Aug 07 UK
Dy-