Pd Return to Factory Settings
If it will be necessary to set the program to factory setting, proceed as follows:
1.
Hold the button FUNC pressed for more than 4 seconds.
2.
The display shows P1. The unit is in the setting mode for operating 1 resp. 2
gate openers.
3.
Press the button FUNC several times until the display shows Pd.
4.
Hold the button INC pressed for approx. 2 seconds in order to set the
program to factory settings. The display shows dF.
5.
If all adjustments are made and in order to quit the program, press the button
FUNC. The display shows "– –". The unit enters Standby mode again.
Programming
25