Table of Contents
Advertisement
Position of the Gate Opener
The instructions in this manual are intended for Pull-to-Open gate installation.
That means the gate will be opened by retracting the gate opener rod. Therefore
the gate opener must be installed from inside of the property. Make sure the gate
does not extend over public footpaths or roads while operating.
Post
(6)
Moving Rod is extended
(7)
Please mind the table on the next page in order to determine the correct position
of the mounting material resp. the gate opener.
The distances A + B must not exceed 42 cm. The distance A must be at least 8
cm or longer. Example: If distance A is 20 cm, the distance B may not exceed 22
cm. The resultant angle may not be smaller than 90°.
The red marked angle setting should be avoided.
Make sure that the flat side
of the gate opener (red
arrows) is situated at the
Post
gate side. This will ensure
a wider opening angle.
(6)
(7)
9
Advertisement
Table of Contents
