Table of Contents
Advertisement
2.
Press the button FUNC in order to store the settings.
The display shows PA. The unit is now in the mode "Automatic Closing
Time".
The gate opener is equipped with automatic closing time function. That means the
gate will automatically close after the adjusted time.
PA Automatic Closing Time
1.
Press the button INC or DEC in order to adjust the automatic closing time.
Factory setting for the automatic closing time is 60 seconds. Settings from
0 – 99 seconds are possible. Each time you press the button INC, the value
will increase and when pressing the button DEC, the value will decrease.
The setting 0 indicates that the automatic closing time is deactivated. That
means the gate has to be closed by pressing the remote control. It will not
close automatically.
2.
Press the button FUNC in order to store the setting.
The display shows Pb. The unit is now in the mode "Soft Start".
Pb Soft Start
Soft Start function means that the gate will be opened and closed softly and not
fitfully.
1.
Press the button INC or DEC in order to adjust soft start function.
Factory setting for soft start is 3 seconds. Settings from 1 – 9 seconds are
possible. Each time you press the button INC, the value will increase and
when pressing the button DEC, the value will decrease.
2.
Press the button FUNC in order to store the setting.
The display shows PC. The unit is now in the mode "Setting the Soft Start,
Fast Running and Soft Stop Period Learning".
PC Setting the Soft Start, Fast Running and Soft Stop Period
While adjusting the Fast Running Period, the Soft Stop Function will be achieved
simultaneously. Soft Stop Function means that the gate opener runs at slow
speed during the last period before the gate completely opens or closes. The Soft
Stop Period cannot be directly adjusted. It can only be determined by adjusting
the Fast Running Period.
That means: To shorten the Soft Stop Period, the Fast Running Period has to be
extended.
Programming
23
Advertisement
Table of Contents
