Westfalia 18 39 13 Instruction Manual page 16

3. Mount the gate opener on a trail basis on the gate and fasten with clamps in
order to check correct position.
Make sure the gate opener is level!
Post
Determine the correct position of the gate opener and the bracket assy. Please
also observe the drawings on the next page.
Make sure the min. distance between gate and gate opener is 2.5 cm. This
distance must be maintained in the gate-closed position and the gate-opened
position.
Make sure the gate opener and the bracket do not
hit each other. If the angle is not correct, readjust
the angle with the 5 openings in the post bracket.
Mounting
Bracket Assy
Opener
Opener is in OPEN Position
(3)
12
(8)
14
16
13
4 17