Preparation - Westfalia 18 39 13 Instruction Manual

Before first Use
Unpack all parts of the swing gate opener set and check for any damage in transit
resp. for completeness. Compare the scope of delivery with the pages III + IV.
Dispose of packaging materials or store it out of reach of children. Plastic bags
etc. may become a deadly toy for children.
Mounting Conditions/Requirements

The swing gate opener is designed for light-weighted swing gate systems in
private use only.

The swing gate opener is designed for gates with max. weight of 300 kg and
with a length of max. 3 m and a max. height of 3 m. The structure of the gate
has to be rigid (Iron, Metal, Wood).

The swing gate system must be in good mechanical and trouble-free
condition and should not be damaged or has signs of wear. It must be
possible to open and close the gate by hand without any problems. The
mechanical gate lock must be dismounted resp. disengaged.

The control box may only be installed by a qualified professional in an easily
accessible place.

Preparation

1. To ensure proper and quick mounting, read the manual thoroughly.
2. Allow a second person to assist you. This will make installation easier.
3. Have the required tools available.
- Power Drill and Drill Bits
- Open End Wrenches (Size 14 and 17)
- Small Level
- Philips and Slot Screwdriver
4. Disengage the existing swing gate lock.
Hint: The swing gate does not need an additional lock as the swing gate
opener is self-locking when connecting to the control box. The gate cannot be
easily opened without damaging the gate opener or the hinges of the gate
system.
Preparation
- Tape Measure/Folding Ruler
- Wire Stripers
- Hacksaw
- Ball Pen/Pencil
4