Table of Contents
Advertisement
1.
Assemble the post bracket (6) together with
the post pivot bracket (7), as shown in the
drawing.
2.
Tighten the hex nut but do not overtighten.
3.
Mount the gate opener 1 with the already
assembled bracket assy (post pivot bracket
and post bracket) and use the clevis pin (20)
and the hairpin clip (19) in order to lock the
opener. Make sure the gate opener is mount-
ed with the motor facing downwards.
Bracket Assy
4.
Mount the gate bracket
(8) on the front mount
of the gate opener (1).
Use the clevis pin (18)
and secure with the
hairpin clip (19).
Rear Mount
(20)
Assembly
(19)
(18)
Front Mount
8
(14)
(6)
(7)
(6)
(9)
(11)
(15)
(8)
(19)
Advertisement
Table of Contents
