Hd Skin Tone Dtl - Panasonic AK-HRP1000G Operating Instructions Manual

21 HD SKIN TONE DTL

The control destination differs depending on the unit configuration.
When the camera is an AK-UC4000
The control is performed for the camera.
When the camera is other than the above
When the system format is set to UHD, the control is performed for the CCU. Otherwise, the control is performed for the camera.
The setting values will vary depending on the connected camera.
Item
MEMORY SELECT Changes memory for saving the skin tone detail setting values(CRISP, PHASE, WIDTH and SATURATION).
CURSOR Enables or disables the position cursor that obtains the saturation and color phase information for controlling
skin tone detail effects.
POS H Sets horizontal cursor position.
POS V Sets vertical cursor position.
SKIN GET Automatically acquire saturation and hue information from the cursor position.
ZEBRA SWITCH Sets whether to add a zebra pattern to the Y signals of the PM output to make areas subject to skin tone
detail effects easily identifiable.
ZEBRA EFFECT Selects the memory to which skin tone detail effects will be added.
EFFECT MEMORY Selects the memory to which skin tone detail effects will be added.
SKIN TONE CRISP Removes very faint noise components from detail components in skin tone areas.
Setting details
- 88 -
ROP menu