Front Panel 9 - Panasonic AK-HRP1000G Operating Instructions Manual

Front panel 9

1 Camera number/tally display
2 [ALM] indicator
3 [OPT] indicator
4 [PANEL ACTIVE] button
5 [CALL] button
1
2
3
8
7
4 5 6
This display shows the camera number information and tally information.
This is the camera and CCU warning indicator lamp.
Consult your dealer if a failure occurs.
The indicator lights red to indicate when the camera and CCU optical reception level is not
strong enough, when a data error has occurred in the CCU optical transmission/reception
section, and when a fan error or temperature error has been occurred on the camera or
CCU.
This is the camera cable warning indicator lamp.
Status displays
Lit Orange: Warns that an optical transmission error has occurred.
Lit red: Indicates that the camera is not connected to the CCU.
Off: The camera cable is connected normally.
Use this button to lock (disable) the panel operation.
When disabled, the LCD panel display will turn off. The [ND], [CC], [M.GAIN], and [SHUTTER]
setting buttons will also turn off.
Lock range
Status displays
On:
Off:
Press this button to call the camera operator.
The call switch on the camera and CCU is lit while this button is pressed.
Also, when the call switch is pressed on the camera or CCU, this switch lights and a buzzer
sound is output.
Status displays
On: Indicates that the call switch on the camera or CCU is pressed.
Off: Indicates that the call switch on the camera or CCU is not pressed.
9
Enabled
Disabled
- 33 -
Parts and their functions