Panasonic AK-HRP1000G Operating Instructions Manual page 113

Item Setting value
ROP DATA SAVE NO?
YES?
ROP DATA LOAD NO?
YES?
SD CARD FORMAT NO?
YES?
INITIAL with NW NO?
YES?
INITIAL NO?
YES?
POWER BUTTON SHORT
LONG
IRIS CALIBRATION -
TOP
IRIS CALIBRATION
BOTTOM
UPGRADE NO?
YES?
PAINT VOL CO STD
MODE1
MODE2
SYSTEM VERSION (Version display)
SOFT VERSION (Version display)
FPGA VERSION (Version display)
Save the unit's setting information.
This applies to the following menus.
[ROP SETTING][CONNECT SETTING][CAMERA IP SETTING][ROP IP SETTING]
After starting this process, do not turn off the unit or remove SD cards until the pro-
cess is complete.
Load the unit's setting information.
This applies to the following menus.
[ROP SETTING][CONNECT SETTING][CAMERA IP SETTING][ROP IP SETTING]
After starting this process, do not turn off the unit or remove SD cards until the pro-
cess is complete.
Format the SD card.
Return the unit's settings to the factory default values.
This applies to the following menus.
[ROP SETTING][CONNECT SETTING][CAMERA IP SETTING][ROP IP SETTING]
Return the unit's settings to the default values.
This applies to the following menus.
[ROP SETTING]
The method of operations for the [POWER HED] and [POWER VF] buttons can be
changed.
SHORT: The power can be turned on or off when pressing the [POWER HED] button
or the [POWER VF] button.
LONG: The power can be turned on or off when pressing and holding the [POWER
HED] button or the [POWER VF] button.
IRIS CALIBRATION adjusts the operating range of the [IRIS] lever.
[IRIS CALIBRATION TOP] is executed when the [IRIS] lever is moved to the OPEN
end, and [IRIS CALIBRATION BOTTOM] is executed when it is moved to the CLOSE
end.
Updates the software of the unit.
After starting this process, do not turn off the unit or remove SD cards until the pro-
cess is complete.
Allows you to change the control range for white balance, pedestal, and flare.
STD: Standard control range.
MODE1: About half the control range of STD.
MODE2: About one-third the control range of STD.
Displays the system version.
Displays the software version.
Displays the FPGA version.
- 113 -
Setting details
ROP menu