Panasonic AK-HRP1000G Operating Instructions Manual page 122

Item Setting value
FILE SELECT ALL
ALL SCENE
SCENE
ALL USER
USER
ALL LENS
LENS
ALL REF
REF
GET FILE -
PUT FILE SCENE1 to SCENE8
EXT1
EXT2
USER1 to USER3
LENS1 to LENS32
REF1 to REF3
EXECUTE NO?
YES?
NOTE
As the unit is not equipped with a clock function, the date and time at which the file was saved on the camera will be used for the
creation dates of saved files.
Selects the type of files to be loaded.
ALL
Loads the data saved with "ALL".
ALL SCENE
Loads all scene file data (SCENE1 to SCENE8) saved with "ALL".
SCENE
Loads a single scene file.
ALL USER
Loads all user file data (USER1 to USER3) saved with "ALL".
USER
Loads data from a single user file.
ALL LENS
Loads all lens file data (LENS1 to LENS32) saved with "ALL".
LENS
Loads a single lens file.
ALL REF
Loads all reference user file data (REF1 to REF3) saved with "ALL".
REF
Loads data from a single reference user file.
When you press the [MENU] dial, data of the type selected in [FILE SELECT] is loaded from
the memory card, and a list of file names appears.
When you select a file from the file list and press the [MENU] dial, the previous screen
appears again, and the file name of the selected data appears in [GET FILE].
Specify the LOAD destination type.
This cannot be specified when [FILE SELECT] is set to "ALL", "ALL SCENE", "ALL
USER", "ALL REF" or "ALL LENS".
When [FILE SELECT] is set to "SCENE", "SCENE1" to "SCENE8" and "EXT1" and
"EXT2" can be selected. The loaded data is saved to the unit, only when "EXT1" or
"EXT2" is selected, and pressing the [EXT1] or [EXT2] button of the SCENE FILE
applies the data to the camera and CCU.
"Front panel 4" (see page 24)
When [FILE SELECT] is set to "USER", "USER1" to "USER3" can be selected.
When [FILE SELECT] is set to "LENS", "LENS1" to "LENS32" can be selected.
When [FILE SELECT] is set to "REF", "REF1" to "REF3" can be selected.
Select "YES?" to load the selected data.
After starting this process, do not turn off the unit or remove SD cards until the process is
complete.
- 122 -
Setting details
ROP menu