Front Panel 2 - Panasonic AK-HRP1000G Operating Instructions Manual

Front panel 2

1 [ASSIGN STATUS] button
2 Buttons [1] to [5]
(CONTROL/MODE)
3 [CONTROL/MODE] button
NOTE
The button settings configured with the above operations will appear at the top of the status screen.
2
Use this button to display the ASSIGN status screen.
The functions assigned to the [1] to [5] (CONTROL/MODE) buttons and [ASSIGN] button are
displayed on the LCD panel.
When you press this button while the menu screen is displayed, the ASSIGN status screen
will not appear. Press the button after turning off the menu screen display.
"ASSIGN status screen" (see page 52)
Status displays
On: ASSIGN status screen is displayed
Off: ASSIGN status screen is hidden
Use these buttons to select users 1 to 5 when the [CONTROL/MODE] button is set to
CONTROL.
When the [CONTROL/MODE] button is set to MODE, pressing these buttons enables/dis-
ables the functions assigned to each button.
"CONTROL(MENU)1" "CONTROL(MENU)5" (see page 110)
to
"MODE(ON/OFF)1" to "MODE(ON/OFF)5" (see page 111)
Status displays
When "FLARE", "GAMMA", "KNEE", "W.CLIP", "HD.D", "UHD.D", or "SD.D" are assigned to
the buttons
On:
Off:
When functions other than the above are assigned
On:
Off:
Use this button to switch between the control items and mode items that appear under but-
tons [1] to [5].
- 22 -
1
3
OFF
ON
ON
OFF
Parts and their functions