Panasonic AK-HRP1000G Operating Instructions Manual page 20

5 [AUTO WHITE] button
6 [AUTO BLACK] button
7 [AUTO SET UP] button
8 [CHARA] button
9 [MATRIX] button
10 [SKIN DTL] button
11 [DRS] button
12 [B.GAMMA] button
Use this button to perform auto white balance adjustment.
Status displays
On: Indicates that the auto white balance adjustment has started.
Flashing: Warns that the automatic white balance adjustment ended without
being completed.
When highlights and lowlights are lost, white balance is returned to its
previous value. When correct white balance cannot be obtained, adjust-
ment stops at the last obtained value.
Off: Indicates that the auto white balance has been adjusted correctly.
Press and hold the [AUTO WHITE] button during white balance adjustment (lamp on)
n
cancels adjustment and turns the lamp off. ("BREAK" appears on the picture monitor
(PM) of the CCU.) Then the white balance value returns to the value it had prior to auto
white balance adjustment.
Use this button to perform auto black balance adjustment.
Status displays
On: Indicates that the auto black balance adjustment has started.
Flashing: Warns that the automatic black balance adjustment ended without
being completed. Auto black balance returns to the value it had prior to
adjustment.
Off: Indicates that the auto black balance has been adjusted correctly.
Press and hold the [AUTO BLACK] button during white balance adjustment (lamp on)
n
cancels adjustment and turns the lamp off. ("BREAK" appears on the picture monitor
(PM) of the CCU.) Then the black balance value returns to the value it had prior to auto
black balance adjustment.
Use this button to start auto setup.
The setup status is output to the picture monitor (PM).
"Auto Setup" (see page 36)
Use this button to switch on and off the character display of the status screen on the CCU pic-
ture monitor (PM).
Status displays (button press method)
On (short press): Displays characters on the picture monitor (PM). Each short press
changes the display data.
Off (long press): Turns off the picture monitor (PM) character display.
Use this button to enable the function to correct saturation and color phase according to the
gain setting of each color component in matrix memory.
Each press of the button turns the function on or off.
Status displays
On:
Off:
Use this button to apply coring to the detail enhancement of the skin tone areas in the video
output to soften or increase the enhancement of skin tone details.
Each press of the button turns the function on or off.
You can select "UHD", "HD", or "SD" as the target for skin tone detail control under [ROP
SETTING] > [SKIN DTL SW] of the ROP menu.
"SD" is enabled when [CONNECT SETTING] is set to "Serial(AK)" or "LAN(AK)".
"SKIN DTL SW" (see page 112)
Status displays
On:
Off:
Use this button to enable or disable the dynamic range stretcher.
Status displays
On:
Off:
Use this button to enable or disable the black gamma correction.
You can select "HDR" (HLG B.GAMMA) or "SDR" (B.GAMMA) as the target for enabling or dis-
abling under [ROP SETTING] > [B.GAMMA SW] of the ROP menu.
"B.GAMMA SW" (see page 111)
Status displays
On:
Off:
- 20 -
Parts and their functions
ON
OFF
ON
OFF
ON
OFF
ON
OFF