6．Weighing Mode Setting And Operation - Unipulse F159 Operation Manual

6.WEIGHING MODE SETTING AND OPERATION
6. WEIGHING MODE SETTING AND OPERATION
Weighing mode is a method to draw specified amount of material accurately from
the raw material storage (e.g. hopper, tank).
Quite an exact amount of material can be drawn from the source vessel by using
a combination of such parameters and techniques including: Final, Set point 1, Set
point 2, Free fall compensation, Over/Go/Under criteria, timers for Comparison
Inhibit, and Judge.
This control mode has variants depending the material discharging methods:
Feed weighing and Discharge weighing, simple comparison and sequence
control.
59