Wallbox Commander 2 Installation And User Manual
Mobile connectivity
Hide thumbs
Also See for Commander 2:
- Installation manual (112 pages) ,
- User manual (50 pages) ,
- Service manual (12 pages)
Related Manuals for Wallbox Commander 2
Summary of Contents for Wallbox Commander 2
- Page 1 Mobile Connectivity Installation and User Guide. Summary: Your Wallbox charger can be fitted with an 3G/4G USB stick to enable internet connection anywhere through the mobile network.
- Page 2 Index 1. Important Notes 2. Required Material and Tools 3. Installation of the 3G/4G USB Stick 4. Software Version 5. Configuration Wallbox App 6. Connection Status myWallbox Portal Wallbox App 7. 3G/4G Data Usage 8. Troubleshooting 9. Legal Notice...
-
Page 3: Important Notes
The charger must be installed following Before the installation of the 3G/4G USB stick, the respective installation manual, that is the Wallbox must be powered o and its cover delivered with the charger. removed. After, the Wallbox must be properly closed, as defined in its installation manual. - Page 4 STEP 3 Connect the 3G/4G USB stick in the USB port on the cover as shown in the figures below. Commander cover with Commander 2 cover with 3G/4G USB stick 3G/4G USB stick In Commander, only WiFi USB stick or 3G/4G USB stick can be used at a time.
-
Page 5: Software Version
4. Software Version Please check that your charger runs on the latest software version. You can check this by connecting to it with the Wallbox App and reviewing the software version in the settings section. 5. Configuration The configuration parameters of the 3G/4G USB stick depends on your SIM card provider. -
Page 6: Connection Status
6. Connection Status You can check the status of the charger in the myWallbox portal or in the Wallbox app. This icon indicates that the Internet connection is done through the cellular network. If the charger is online it is displayed in blue background in the list of chargers. If offline, it is displayed in grey background. -
Page 7: Legal Notice
Wallbox reserves the right to make changes to the specifications and processes of the product and documentation at any time without prior notice.
Need help?
Do you have a question about the Commander 2 and is the answer not in the manual?
Questions and answers