Intel Quark SoC X1000 User Manual page 25

Board support package bsp, build and software

Hide thumbs Also See for Quark SoC X1000:

Table of Contents

Programming flash on the board using serial interface

6. The serial console displays a boot device selection box (below).

6. You will see a print out, the top line of which looks like this:

7. Verify you are using the correct version of CapsuleApp.efi by using the -v

8. Enter the following command:

Note: You must enter the full filename of the Flash-missingPDAT.cap file.

Order Number: 329687-007US

Select UEFI Internal Shell.

You will see a display similar to this:

fs0

:HardDisk - Alias hd7b blk0

This is your SD card. To mount it, type: fs0:

option. You must use version 1.01 or later.

CapsuleApp.efi Flash-missingPDAT.cap

Intel

Quark™ SoC X1000

BSP Build and Software User Guide

Table of Contents