Intel Quark SoC X1000 User Manual page 23

Patching flash binary files using platform data file
Note: In the [Mrc Params] section below, the MRC data.value MUST correspond to
[Mrc Params]
id=6
ver=1
desc=MrcParams
data.type=file
#data.value=MRC/clantonpeak.v1.bin
#data.value=MRC/kipsbay.v1.bin
#data.value=MRC/crosshill.v1.bin
#data.value=MRC/clantonhill.v1.bin
data.value=MRC/kipsbay-fabD.v1.bin
[MAC address 0]
id=3
desc=1st MAC
data.type=hex.string
data.value=001320FDF4F2
[MAC address 1]
id=4
desc=2nd MAC
data.type=hex.string
data.value=02FFFFFFFF01
Next, run the script as follows:
This creates a Flash+PlatformData.bin file to be programmed on the board, as well
as a sample-platform-data.bin file containing the same data that was inserted in
the Flash image.
To program your board using Dediprog, skip to
Order Number: 329687-007US
the platform data.value used above.
# cd spi-flash-tools/platform-data/
# platform-data-patch.py -p sample-platform-data.ini \
-i ../../sysimage_*/sysimage.CP-8M-release/Flash-missingPDAT.bin
# cd -
#replace with MAC address from sticker on board
Section 11.
Intel ® Quark™ SoC X1000
BSP Build and Software User Guide
23