Relay Outputs; Instructions To Setting The Relay Outputs As No / Nc Or Supervised - Honeywell MA-2000 Installation Manual

MA-2000

6.3 Relay outputs

FUNCTION CHARACTERISTICS
Sounder 1 contact controlled by 24 Vcc / 1 A resistive
USR2
Max 1 A resistive 30 V DC, NO / NC or supervised output 1 A Fused, selectable through
Jumper JUSR2 (refer to basic board topography)
USR1 Max 1 A resistive 30 V DC, NO / NC or supervised output 1 A Fused, selectable through
Jumper JUSR1 (refer to basic board topography)
General Alarm Max 1 A resistive 30 V DC, NO / NC or supervised output 1 A Fused, selectable through
Jumper JALL (refer to basic board topography)
General Fault Max 1 A resistive 30 V DC, NO / NC or supervised output 1 A Fused, selectable through
Jumper JGST
6.3.1

Instructions to setting the relay outputs as NO / NC or Supervised

22
(refer to basic board topography)
M-167.1-MA2000-EN / 06.2022