Removing The Console-Method - Whirlpool Cabrio WTW8500DW Technical Education

COMPONENT ACCESS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
Removing the Console—Method B
1. Unplug washer or disconnect power.
2. Turn off water supply to washer.
3. Tape lid down.
4. Remove five (5) 1/4" hex-head mounting screws from
the rear of the console as indicated in Figure 1. Remove
harness cover and set aside.
Harness Cover
5. Slide top forward about 1/2" (see Figure 2).
6. Raise the top about 1/4". Then, while still keeping it lifted,
push the top back about 1/4 " (see Figure 3).
4-4 Whirlpool 2014 CABRIO
n
Removing the Console—Method B
Figure 1
½
"
Figure 2
Direct Drive Washer
®
7. Tilt the top up on the rear hinges.
8. Using a flat blade screwdriver, depress the console clips
(identified by the two arrows) to release console from top
panel (see Figure 4).
Release Console Clips
¼
"
Figure 3
Figure 4
¼
"