Section 4: Operations; Operation Overview - Grizzly G1071 Owner's Manual

SECTION 4: OPERATIONS

Operation Overview

The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual, seek additional training from experienced
machine operators, and do additional research
outside of this manual by reading "how-to" books,
trade magazines, or websites.
To reduce your risk of
serious injury, read this
entire
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Model G1071 (Mfd. Since 11/10)
manual BEFORE
To complete a typical operation, the operator
does the following:
1.
Examines workpiece to make sure it is suit-
able for sanding.
2. If necessary, tilts table to correct angle and
locks it in place.
3. Installs sanding spindle assembly. (Refer to
Installing Sanding Spindles on Page 21).
4. Selects table insert best suited to accommo-
date size of the sanding drum and tilt of the
table.
5. Puts on safety glasses and a respirator.
6.
Starts oscillating sander.
7.
Feeds workpiece against direction of spindle
rotation, maintaining a safe working distance
between hands and sanding drum.
8. Turns machine OFF.
-19-