Recording And Playing Back Images; 1: Recording Still Images - Sony Mavica MVC-FD91 Operating Instructions Manual

Recording and playing back images

Recording still images
To record the images, slide POWER down to turn on the power (The
POWER lamp lights up) and insert the floppy disk until it clicks.
ACCESS lamp
1
Set PLAY/STILL/MOVIE to STILL.
2
Press the shutter button halfway
down.
The AE lock indicator
When AE (auto exposure), AWB (auto
white balance) and AF (auto focus) are
frozen, the AE lock indicator stops
flashing.
3
Press the shutter button fully
down.
The image is recorded on the disk.
The number of images you can
record on a floppy disk
About 10 – 16 images with all default settings. (p. 29)
Note
When the image is recorded on the disk, the ACCESS lamp flashes.
When the ACCESS lamp is flashing, never shake or strike the unit. Also, do
not turn the power off or remove the battery pack or floppy disk. Otherwise,
an image data breakdown may occur and the floppy disk may become
unusable.
POWER lamp
r
(green) flashes.
17-GB