÷ Changing the mode settings
Once copying is completed, the message "COMPLETE"
To copy images to another floppy disk, select "CONTINUE" with the
control button and repeat the operations in steps 2 through 4 above.
To discontinue copying, select "EXIT" with the control button.
• When you copy to the floppy disk which is a small remaining capacity,
"DISK FULL" may appear on the LCD screen.
•To discontinue copying onto a floppy disk halfway (in the middle of steps
from 1 to 4 above), change PLAY/STILL/MOVIE or turn off the camera.
Select this item to delete a displayed image(s).
To delete an image(s), select the desired delete option from the menu
while the image(s) is displayed on the LCD screen.
In Single screen mode
•Select OK to delete displayed image.
•Select CANCEL to cancel deleting image.
In Index screen mode
•Select ALL to delete all images recorded with this camera.
•Select SELECT to delete selected images.
1 Use the control button to display the red
image you want to delete.
The selected image number reverses color. To cancel selection, press
the control button again. The image number display returns to
2 Select "ENTER" with the control button, then press it.
To cancel deleting image, select "CANCEL" with the control button,
the press it. The screen returns to the menu screen.
• Once deleted an image cannot be restored. Before deleting, carefully check
the images you intend to delete.
• Even when you select "ALL", you cannot delete the protected image.
• When you select "SELECT" , you cannot select a protected image.
mark at the