Charging Station S - ProGlove Mark 2 User Manual

CHARGING STATION S

PROBLEM
MARK 2 does not charge in
Charging Station S.
LEDs of MARK 2 do not light up im-
mediately when MARK 2 is placed
in the Charging Station S.
CAUSE
MARK 2 is not correctly inserted in
Charging Station S.
Charging Station S is not connect-
ed to power source.
MARK 2 is defective.
Charging Station S is defective.
MARK 2 charges in the Charging
Station S, but the feedback signals
are delayed by about 30 seconds.
SOLUTION
Insert MARK 2 in the Charging

Station S again.
Connect Charging Station S to

power source.
MARK 2 must be replaced.
More detailed information can be

found at
proglove.com/support
The Charging Station S must be
replaced.
More detailed information can be

found at
proglove.com/support
Wait until the LEDs of MARK 2

signal the charging.
.
.
39