Connect Via Ble Hid; Prerequisites - ProGlove Mark 2 User Manual

4 STEP: CONNECT MARK 2
TH

CONNECT VIA BLE HID:

MARK 2 can be used to establish a connection via
Bluetooth Low Energy Human Interface Device
to an end device.
Possible operating systems are: Apple iOS,
Google Android, Microsoft Windows.
The individual steps for connecting to the respective
operating systems for the first time can be found in the
following.
More detailed information about using MARK 2 sys-
tem daily can be found in the Quickstart Guide MARK 2 under
support.proglove.com.

PREREQUISITES:

the end device supports at least Bluetooth 4.0 stan-

dard
no interference or physical obstacles

interfere with the connection between MARK 2
shelves)
and the end device
the range between MARK 2 and the end device is

< 10 meters
TIP
Visually label the connected devices
, e.g. using numbering or a color code. This will
device)
allow the user to find the right devices faster.
TIP
Adhere the pairing barcode to the end device. In this way, the
user can find it quickly and easily.
(BLE HID)
On a battery-operated end device, the power-saving mode
can lock the end device and MARK 2 simultaneously.

end device.
(BLE HID)
The last 5 digits of the serial number attached to the
back side identify MARK 2 among the available Bluetooth
devices.

RESULT
Example serial number: MARK 2 - 00000.
To make MARK 2 visible for the end device, the
MARK 2 must be put into pairing mode.
(e.g. metal
(MARK 2 with the end
RESULT
MARK 2 pulses blue and beeping sounds can be heard.
MARK 2 searches for an end device in pairing mode.
Permanently disable the power-saving mode of the
Read the serial number of MARK 2.
1. Press the textile trigger on the
glove in order to activate the
red crosshairs.
2nd Aim MARK 2
crosshairs at the pair-
ing barcode and scan.
19