ProGlove Mark 2 User Manual page 12

CHARGING STATION S
OVERVIEW
The Charging Station S consists of two charging trays
that charge two MARK 2 devices at the same time. The
charging status is indicated by the LEDs of MARK 2. The
LEDs pulse red while in charging mode. When the battery
is fully charged, the LEDs pulse green constantly. It takes
about 2 hours to charge a MARK 2. The Charging Station S
can be attached to work stations, for example, through the
attachment openings
Attachment
opening
for M5
screws
Charging tray
Attachment opening for
cable ties
12
.
(with M5 screws or cable ties)
Pins
Label with serial number
TECHNICAL DATA
MECHANICAL PROPERTIES:
Dimensions: ............................. 140 x 56 x 19mm
Weight: ...................................... 110g
ELECTRONIC PROPERTIES:
Power supply: ........................... 5 VDC (1.2 A)
ENVIRONMENTAL CONDI-
TIONS:
Protection against dust and
water: ....................................... IP20
Working temperature: ............ -23°F to +122°F
USB-C
via power supply SAW-0501200