Configuration Tool; Barcode Settings; Data Formatting; Advanced Formatting - ProGlove Mark 2 User Manual

CONFIGURATION TOOL

The configuration tool under
used to individually setup the MARK 2 system and improve
scanning processes.
The configuration occurs in 5 steps:
1 STEP: BARCODE SETTINGS
ST
The barcode settings can be used to switch the barcode
types
(including inverse barcodes)
code lengths, edge tolerances as well as check digits.
APPLICATION EXAMPLE:
Avoid incorrect scans with different barcode types on one
label.
Switch off unused barcode types.

2 STEP: DATA FORMATTING - PREFIX
ND
AND SUFFIX
Prefixes and suffixes can be used to change barcode data
with a maximum of 1 character.
30
config.proglove.de can be
on or off and to set bar-
APPLICATION EXAMPLE:
Identify different work stations.
Create prefix with a specific digit.

3 STEP: DATA FORMATTING -
RD

ADVANCED FORMATTING

Advanced formatting can be used to change barcode data
through rules with conditions and actions. These are then
in an IF-THEN relationship with each other, which means
that:
IF a condition is defined,
THEN an action occurs.
An action is also carried out without a condition. 4 condi-
tions and 4 actions are possible per rule. Overall, up to 16
rules can be defined.
APPLICATION EXAMPLE:
Insert the suffix "H-TAB" for the barcode type Code128
Create the condition "Code types: Include code types:

Code128: and the action "Insert: Suffix: H-TAB."